TPC’s workforce is starting to driving the U-Sheet pile into soil as soon as nationwide construction lockdown is released by government

TPC’s own factory manufactured U-Sheet pile are significant and always meet with project requirements.

Details of product are as following:

TPC prestressed concrete sheet pile is produced under quality control and up-to-date machine. All processes of the production are strongly concentrated by the engineers and supervisors. Our products are well known used for the permanent and also temporary retaining wall. Our innovative design is more suitable. safe, and economy when compare with general steel sheet pile. TPC sheet piles can be designed for all construction cases and the construction sequence required. To select the type, cross-sectional area, length, the bending moment and the shear force, TPC sheet pile must be designed and calculated by only the specialized engineer. The design and method of construction must be considered and suggested to the contractors. Also the method of construction is strictly controlled by the civil engineer at site.

Concrete

Minimum ultimate compressive strength shall not less than 350 ksc cylinder at 28 days.

Minimum transfer strength shall not less than 245 ksc cylinder.

High early strength Portland cement is used and cement content shall not less than 350 kgs per cubic metre.

PC wire

Pc wire Ø 4,5 mm. are used and minimum breaking strength is about 16,500-18,500 ksc.

Minimum force transfer to concrete shall not be less than 70% of breaking strength.

REMARKS : Allowable bending moment and shear force depend on soil condition and external surcharge load.